Placing Originals; Acceptable Originals; Placing Originals On The Original Glass - Toshiba ES9465 MFP Copying Manual

Placing Originals

Acceptable originals

When the RADF (Reversing Automatic Document Feeder) is used, 2-sided originals can be automatically scanned one
sheet after another. When the original glass is used, originals such as OHP films, tracing paper, booklet or 3-dimensional
objects, that cannot be placed on the RADF can be scanned, as well as plain paper.
Location
Original glass
RADF
*1 Automatic size detection for originals on the original glass is available only for ES9455 MFP / ES9475 MFP Series.
Automatic size detection does not work properly when A/B format originals are used in equipment for North
America. It does not work properly when LT format originals are used in equipment other than that for North
America.
In some models, automatic size detection does not work properly when K format paper is used for printing. (K
format is a standard paper size in China.)
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Be sure to place ST-size or A5-size originals in a landscape direction when using the RADF.
A maximum of 1000 sheets can be scanned per 1 copy job or up until the embedded memory becomes full. When
the hard disk is not installed, the maximum of sheets that can be scanned per 1 copy job is approx. 180 (when the
color mode is "FULL COLOR" or "AUTO COLOR") or approx. 250 (when the color mode is "BLACK"), or up until
the embedded memory becomes full.

Placing originals on the original glass

The original glass can be used for originals such as OHP films or tracing paper, as well as plain paper, that cannot be
placed on the RADF.
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the Original Cover or the RADF.
Raise it 60 degrees or more so that the size of the original can be detected correctly.
2
Place the original with its face down on the original
glass and align it with the left rear corner of the glass.
Maximum size
Length: 297 mm (11.69")
Width: 432 mm (17.01")
1-sided originals: 35 - 157 g/m
(9.3 - 41.8 lb.)
2-sided originals: 50 - 157 g/m
(13.3 - 41.8 lb.)
Acceptable sizes for automatic
Paper weight
Other than North America: A3, A4,
A4-R, A5-R, B4, B5, B5-R, 8K, 16K,
— 16K-R
North America: LD, LG, LT, LT-R,
ST-R
Other than North America: A3, A4,
2
A4-R, A5-R, B4, B5, B5-R, FOLIO
North America: LD, LG, LT, LT-R,
2
ST-R, COMP
2 HOW TO MAKE COPIES
*1
size detection

Placing Originals

27