To Register The Original Mode Optimal For A Particular Type Of Original (To Have "Custom" Selected) - Toshiba e-STUDIO2010AC Imaging Manual

Hide thumbs Also See for e-STUDIO2010AC:
Table of Contents

Advertisement

5.Scanning-specific Adjustments
5.8
To Register the Original Mode Optimal for a Particular
Type of Original (To have "Custom" selected)
 Explanation
If the value for [05] code is adjusted in existing original mode (Text /Photo, Text, Photo or Gray scale), in
order to clearly scan a particular type of original, other types of original may not be clearly scanned. In
this case, add the original mode option adjusted for a particular type of original as "User Custom" mode.
To have "User Custom" selected, add the value adjusted for [05] code in "User Custom" mode to the one
in reference original mode.
Select reference original mode for "User Custom" from among the original mode options.
To have "User Custom" in the Black mode, select the existing original mode option as reference original
mode.
To have "User Custom" in the Full color mode (including the Auto Color mode) selected, select the
existing original mode or "e-document*" mode option where the value has been adjusted to identify
whiteout areas, as reference original mode.
• This adjustment will have an effect only on the image scanned in the Black mode or the Full color
mode (including the Auto Color mode).
* e-document: This is the mode that corresponds to the law in Japan.
 Procedures
• Perform the adjustment in accordance with the procedures below.
• Only the service technician must perform procedures (1) and (2).
• Both the service technician and the user can perform procedure (3).
(1) Select [08 SETTING MODE]. Change the value for code [7401] or [8303] to select reference original
mode for "User Custom" mode from among the original mode options.
• Select the original mode option, which is most likely to be matched with the image quality the user
desires.
For the Black mode
Value for 08-7401
0
1
2
3
For the Full color mode
Value for 08-8303
0
1
2
3
4
After selecting the reference original mode option, perform the next procedure.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Reference original mode
Reserved (Default)
Text/Photo
Text
Photo
Reference original mode
Reserved (Default)
Text/Photo
Text
Photo
e-document
5-18
© 2018 TOSHIBA TEC CORPORATION All rights reserved

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents