10 Installation
10.3 VisioNerf 3D camera mechanical and electrical installation
10.3 VisioNerf 3D camera mechanical and electrical installation
The camera shall be mechanically installed at a suitable location. It is normally
oriented aiming downward.
Camera dimensions with screw location information is shown in the following
picture. Ensure that the camera is fixed against a flat surface with screws of
appropriate length.
xx1800002007
Connect the camera to the PoE1 network port of the PC with a network cable (cat6).
We recommend the use of shielded network cables.
We recommend a stabilized power supply with 24 VDC, 10 A. Prepare the Power
& I/O cable according to the following table.
Wire color
Blue
Brown/Green
White/Green
White
Continues on next page
134
Designation
0 V
0 V
24 VDC
24 VDC
© Copyright 2014-2018 ABB. All rights reserved.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B