Table of Contents
Advertisement
Step 2: Check that all partitions on the hard drive are selected (all check boxes are
selected) and click Next.
xx1800000397
Step 3: Select Connected directly to my computer. Then select the USB device
(Drive 2, Part 1) as destination drive in the drop-down list and click Next.
xx1800000398
Step 4: Click Next. There is no need to specify a destination folder.
xx1800000399
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
© Copyright 2014-2018 ABB. All rights reserved.
12 Maintenance
12.2 Backup and recovery of the hard disk
Continues on next page
Continued
173
Advertisement
Table of Contents
