Table of Contents
Advertisement
Save the backup file to a safe location, preferably not on the same computer as
the software.
Restore
To restore the backup, turn off the computer and put the backup USB in an available
USB port (preferably the USB3 port).
Enter the boot device manager by pressing Esc when the startup screen is shown.
If the computer boots into Windows, you need to restart and try again.
Select Boot manager.
xx1800000385
Choose to boot from the USB device.
xx1800000386
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
© Copyright 2014-2018 ABB. All rights reserved.
12 Maintenance
12.2 Backup and recovery of the hard disk
Continues on next page
Continued
175
Advertisement
Table of Contents
