Camera Settings - ABB FlexLoader Vision Product Manual

11 Commissioning

11.1.3 Camera settings

11.1.3 Camera settings
Click the camera number to open the camera settings window and adjust the
settings for the corresponding camera.
xx1800000434
Figure 11.1: Default settings for the camera
Camera interface
None (file)
Matrox GigE (Ace)
Basler Pylon GigE/USB
DllCamera3D
Configuration file
Camera settings
Enable color mode
Continues on next page
140
Description
Used for system testing.
Used for standard Basler Ace cameras
Used for system testing.
Used for 3D camera communication.
Configuration file used for Matrox GigE and
DllCamera3D.
Description
Enables the use of color extraction and
combination.
Only possible with Matrox GigE Ace interface.
© Copyright 2014-2018 ABB. All rights reserved.
Default
No
Yes
No
No
GigE_Current-
State.dcf
Default
No
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B