Table of Contents
Advertisement
4 Teachin
4.11 Test & Save
4.11 Test & Save
On the Test & Save tab, the details are saved in the database. Before a detail is
saved you have the opportunity to test how well the identification works.
Place a number of details in different positions under the camera and click Test.
The identified positions and associated grip positions will be shown in the image.
xx1800000229
In order to fine-tune the settings it is usually necessary to obtain more information
about the identification results. Clicking on Show result opens a window with
Continues on next page
60
© Copyright 2014-2018 ABB. All rights reserved.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
Advertisement
Table of Contents
