ABB FlexLoader Vision Product Manual page 142

11 Commissioning
11.1.3 Camera settings
Continued
xx1800000439
Figure 11.2: 3D camera settings
Camera sharing settings
It is possible to share the same physical camera and use it as several logical
cameras.
One single 2D camera (configured as Matrox GigE) can be shared to several logical
cameras, and one or more Cirrus 3D (configured as DllCamera3D) can be shared
to several Cirrus 3D.
For the 2D case, configure several cameras in the configuration editor, and select
Ignore GigE camera IP adress for each camera. Configure the camera for IP
address 192.168.2.2.
Continues on next page
142
© Copyright 2014-2018 ABB. All rights reserved.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B