ABB FlexLoader Vision Product Manual page 139

System settings
Allow blob analysis
Send AnyFeederData
Use length in inch
System Type
Standalone
Slave (through robot)
Slave (through TCP/IP)
Slave (through PLC)
Camera settings
Number of cameras
Alarm and logging settings
Log severity
Log type
IoTSP
MIL error print
Reset part selection
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
Description
Enable alternative way of identifying shapes
based on their size and form. Limitations in
accuracy and orientations apply.
Specialized use case. Transmits detail distri-
bution within the field of view to the robot.
Changes display of length units from metric
to imperial system.
FlexLoader Vision can be externally con-
trolled by other devices or software.
Start, stop and selection of details is possible.
FlexLoader Vision operates as standalone
system.
FlexLoader Vision is controlled by the robot.
FlexLoader Vision can be controlled by a
TCP/IP based application.
FlexLoader Vision can be controlled by the
PLC.
Description
Select the correct number of cameras. Click
on the number associated to the camera to
configure it.
Description
Selectable level of severity for logging.
Selectable types of logging.
Select SmartPhone/WebService if desired.
This service needs an active subscription.
Used for system testing.
Used for resetting saved selections for
groups and details.
© Copyright 2014-2018 ABB. All rights reserved.
11 Commissioning
11.1.2 Main settings
Continued
Default
No
No
No
Yes
No
No
No
Default
1
Default
All
All
No
No
-/-
139