Advanced Position Settings - ABB FlexLoader Vision Product Manual

5.2 Advanced position settings

The advanced position settings allow you to control how the system calculates
edges and the geometrical shape of a position. The settings are accessed by
clicking on Advanced on the Positions tab.
xx1800000233
The Detail level settings govern how the edges are extracted from the image.
Normally you should not change these settings, but if you have an image with low
contrast it may be beneficial to change this setting to High. The slider can also be
used to make further adjustments to edge detection. Very high should normally
only be used in exceptional cases, and then only on images with very low contrast.
If this parameter is set to Very high it can make edge detection less reliable and
extremely sensitive to lighting or the presence of dirt. The effect of changing the
settings is updated continuously in the image.
Note that the Smoothness settings affect every position in the system.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
© Copyright 2014-2018 ABB. All rights reserved.
5 Advanced teachin settings
5.2 Advanced position settings
67