Image Settings For 3D Cameras - ABB FlexLoader Vision Product Manual

4 Teachin

4.4.2 Image settings for 3D cameras

4.4.2 Image settings for 3D cameras
Image settings
The image settings for 3D cameras are found on the Image tab on the Teachin
menu.
The parameters Analysis depth and Seek depth determine which height area,
within the scanner range, should be used to evaluate an image.
For some 3D cameras it takes a long time to obtain a new image, so FlexLoader
Vision would be difficult to work with if the camera took new pictures the whole
time. Therefore the 3D images are not automatically updated. Use the New image
button or short cut Ctrl+Shift to take a new image.
The 3D camera does not need settings for brightness, contrast and gain (like the
2D camera does), so these settings are not visible on the 3D camera user interface.
The grey scale in the image below represents height, and lighter colors mean that
the object is higher up.
xx1800000210
Continues on next page
28
© Copyright 2014-2018 ABB. All rights reserved.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B