Tool Box - ABB FlexLoader Vision Product Manual

3 Overview of the user interface

3.2 Tool box

3.2 Tool box
FlexLoader Vision displays images at many different locations. To the right of each
image there is a tool box. Not all the tools are displayed for every image – only the
tools that can be used for the concerned operation are displayed. When a tool is
selected, the button is highlighted and the tool is used when you click somewhere
in the image. The functions of each of the icons in the tool box are described below.
18
Reset zoom Used to zoom in or out of an image and view the image at normal
scale again.
Zoom in Used to zoom in on an image.
Zoom out Used to zoom out of an image.
Pan If you have zoomed in on an image you can use this tool to move
around the image. Click the mouse button and drag the mouse to
pan. Then release the mouse button.
Define posi- Used to define a position, area or gripper limit. Click the mouse
tion button, drag the mouse diagonally to draw a box of the desired size,
then release the mouse button.
Define grip Used to define a grip. Click the mouse button to place the grip point
at the current mouse position.
Draw Used to draw. Click the mouse button to draw a point at the current
mouse position. Release the mouse button to stop drawing. To
change the drawing size, adjust the slider as required.
Clear Used to delete objects. Click the mouse button to delete the drawing
at the current position. Release the mouse button to stop deleting.
To change the delete size, adjust the slider as required.
Draw line Used to draw lines. Click the mouse button where you want the line
to start, drag the mouse to the point where you want the line to end,
then release the button.
Draw box Used to draw boxes. Click the mouse button where you want the
box to start, drag the mouse to the point where you want the box to
end, then release the button.
Draw circle Used to draw circles. Click the mouse button where you want the
circle to start, drag the mouse to the point where you want the circle
to end, then release the button.
Undo Used to undo the last drawing action.
Brush size Used to changing the brush size for drawing. The brush size is dis-
played as a ring and the size can be adjusted with the mouse scroll
wheel.
© Copyright 2014-2018 ABB. All rights reserved.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B