Table of Contents
Advertisement
Start Matrox Intellicam (Start > Matrox Imaging > Tools > IntelliCam). Click on
File > New, select GigEVision and click OK.
xx1800000980
Click File > Save as ... and save the camera configuration file as follows in
FlexLoader Vision's configuration folder.
xx1800000981
Close IntelliCam and restart FlexLoader Vision. Check that the camera is detected
correctly and shows images in FlexLoader Vision.
Settings for 3D cameras
See separate instructions for information about 3D cameras.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
© Copyright 2014-2018 ABB. All rights reserved.
11 Commissioning
11.3.2 Settings
Continued
157
Advertisement
Table of Contents
