Table of Contents
Advertisement
detailed test results for each identified detail. When a row is selected the associated
detail is indicated by a blue circle in the field of view.
xx1800000230
The information shown in the image is the same as in normal operation.
The results of the secondary search can be displayed by selecting Show secondary
results.
Click Save to save the detail in the database when all of the settings have been
made. The Detail tab appears again.
If the Blob analysis type (optional setting) is selected for the detail, the properties
of the found blobs are shown in percent in relation to the teachin position.
When FlexLoader Vision has identified a pickable detail, a new line is displayed in
the list of test results. The new line is marked Pick and it specifies the data that
would have been sent to the robot in normal operation. The data corresponds to
the coordinates of the robot's tool center point (TCP).
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
© Copyright 2014-2018 ABB. All rights reserved.
4 Teachin
4.11 Test & Save
Continued
61
Advertisement
Table of Contents
