Table of Contents
Advertisement
Parameter
Search ROI [0] / image [1]
Min. contrast [%]
Black [0] / White [1]
Expected length [mm]
Allowed length deviation [mm]:
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
Description
Indicates how the red box affects the edge searching:
The following values are permitted:
0: Edge searching is only performed within the red
box.
1: Edge searching is performed in the entire image,
longitudinally along the red box, over the entire area
as the image permits. This setting may be useful if the
first search does not position the detail correctly lon-
gitudinally.
Indicates the minimum brightness change that is re-
quired to assume there is an edge.
Indicates whether the background is darker than the
detail (0) or lighter than the detail (1).
Indicates the expected length of the detail in mm.
Indicates by how much the length of the detail may
deviate up or down to still be approved.
© Copyright 2014-2018 ABB. All rights reserved.
5 Advanced teachin settings
5.3.4 AddOn analysis
Continued
81
Advertisement
Table of Contents
