Table of Contents
Advertisement
A Technical information
A.1 File structure in FlexLoader Vision
Continued
also found here. These contain the definition of the interface for the PLC of the
user-defined equipment.
Extended user-defined mechanical equipment data can be defined in the files
UserDefinedPlcCamera_1_Tab2.xml - UserDefinedPlcCamera_4_Tab2.xml and
UserDefinedPlcImageCamera_1_Tab2.bmp -
UserDefinedPlcImageCamera_4_Tab2.bmp.
FlexLoader Vision\Data
In this folder, details and tools are stored. The tools are saved in the sub-folder
Tools, while details are saved in sub-folders corresponding to the group name.
There is a *.Detail file for each detail, and for each position a *.n.CollisionImage
and a *.n.TeachinImage, where * represents the detail name and n represents the
position number.
If the secondary search has been activated for a detail, there is also a
*.Secondary.Detail-file.
If a 3D camera is used, there is also a *.HeightAnalysisArea-file.
FlexLoader Vision\Database
In this folder, the FlexLoader Vision database (FlexLoaderVision.mdb) is stored.
When FlexLoader Vision is run, there is also a FlexLoaderVision.ldb file.
252
© Copyright 2014-2018 ABB. All rights reserved.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
Advertisement
Table of Contents
