ABB FlexLoader Vision Product Manual page 143

For the Cirrus 3D case, configure each camera as usual, with separate dll and xml
files, but assign identical IP addresses to all cameras.
Mechanical settings
The mechanical settings determines visual information and communication settings.
Information with regard to the mechanical feeder is shown during teachin and while
working with system settings.
Communication information is used during system initialization and operation.
Mechanical settings
None/PLC
FP 300
FP 400
UserDefined
Has extra tipper
Has rotation unit
Has user defined data
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
CAUTION
The application must ensure that no simultaneous image acquisitions are initiated
on a single camera.
Simultaneous image acquisitions can lead to unpredictable and erroneous
behavior.
© Copyright 2014-2018 ABB. All rights reserved.
Description
No data is exchanged with external PLC, and
no information is shown on HMI.
Selects FP 300 specific settings for this
camera.
Selects FP 400 specific settings for this
camera.
Selects user-defined specific settings for this
camera.
Can be selected for some feeders.
Can be selected for some feeders.
Can be selected for some feeders.
11 Commissioning
11.1.3 Camera settings
Continued
Default
Yes
No
No
No
No
No
No
Continues on next page
143