To copy a program, select the program folder and click Copy. Enter a new name
for the program folder and click OK. The copy is placed in the same folder as the
original.
FlexLoader FP 300
If FlexLoader Vision is used in FlexLoader FP 300, it is possible to adjust the
parameters that govern mechanical control. On the Mechanics tab you will see an
image of FlexLoader FP 300 and you will be able to set the parameters. The
available parameters and their functions are described in the product manual of
FlexLoader FP 300.
xx1800000227
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
© Copyright 2014-2018 ABB. All rights reserved.
4 Teachin
4.10 Mechanics
Continued
Continues on next page
57