Connect the Power & I/O cable to the camera, then switch on the power.
xx1800002008
Pos.
A
B
C
D
If necessary, an optional VGA display and USB mouse/keyboard can be connected
to the camera.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
10.3 VisioNerf 3D camera mechanical and electrical installation
Description
Connector for Power & I/O cable
Network cable connector
USB device connector (optional)
VGA cable connector (optional)
© Copyright 2014-2018 ABB. All rights reserved.
10 Installation
Continued
Continues on next page
135