ABB FlexLoader Vision Product Manual page 112

8 Settings
8.3 Service
Continued
you want to save the backup files or click Browse and browse for the correct folder.
Click OK to apply the settings.
xx1800000254
In the image above, FlexLoader Vision is backed up every Monday at 17:00. The
backup files are saved in the folder C:\FlexLoader Vision\Backup.
For information on how to do a complete hard disk backup or recovery, see
and recovery of the hard disk on page
Password
Some of the system functions can be password-protected.
To set a password for one of the levels, select the desired level and click Set. Leave
the Old password field blank, and then enter the new password in the fields New
password and Confirm new password. Click OK to confirm the change.
Continues on next page
112
• If the system is password-protected on the Intermediate level, you must
enter a password to view the Teachin menu.
• If the system is password-protected on the Expert level, you must enter a
password to view the Settings and Calibration tabs on the Camera menu
and the complete Settings menu.
© Copyright 2014-2018 ABB. All rights reserved.
171.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
Backup