Service - ABB FlexLoader Vision Product Manual

8.3 Service

The Service tab in the Settings window allows you to backup and restore FlexLoader
Vision, set and edit passwords for system functions, change the IP address of the
robot and restart the computer.
xx1800000253
Backup and restore FlexLoader Vision
A system backup includes all files associated with FlexLoader Vision.
To perform a backup, click Backup on the Settings menu > Service tab. Select
where you want to save the backup file and click OK.
To restore the system from a backup file, click Restore. FlexLoader Vision must
be restarted for the restored values to apply. If the system cannot be restored
automatically, you can restore the system manually. For more information on how
to do a manual restore, see
To schedule a backup procedure, click Schedule. Select which day/s and which
time of day you want the backup to be performed. The backup can be scheduled
to up to once a day. Select what units you want to include in the backup process
in the pane to the right. Under Path Settings, enter the path to the folder where
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
Note
Additional backup data may be created for 3D cameras in a separate folder (e.g.
Camera_1_CirrusBackup). These files have to be manually copied to the sensor
if needed.
© Copyright 2014-2018 ABB. All rights reserved.
Manually restoring a backup on page
8 Settings
8.3 Service
256.
Continues on next page
111