Table of Contents
Advertisement
Fit the camera to the isolating plastic mounting plate that is delivered with
FlexLoader Vision and install it at the intended location.
xx1800002006
Connect the camera to the PoE1 network port of the PC with a network cable (cat6).
We recommend the use of shielded network cables. The power to the camera is
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
10.2 Basler camera mechanical and electrical installation
© Copyright 2014-2018 ABB. All rights reserved.
10 Installation
Continued
Continues on next page
131
Advertisement
Table of Contents
