Table of Contents
Advertisement
A Technical information
A.1 File structure in FlexLoader Vision
Introduction
FlexLoader Vision is usually installed in the following folder:
D:\Program Files\ABB Industrial IT\Robotics IT\FlexLoader Vision
The installation folder for FlexLoader Vision always contains the following folders:
Backup, Bin, Configuration, Data, Database and Documentation.
In this document, these subfolders are referred to as the bin-folder or the
backup-folder etc. This always refers to the whole file path. For example, the
bin-folder refers to D:\Program Files\ABB Industrial IT\RoboticsIT\FlexLoader
Vision\Bin.
FlexLoader Vision\Backup
This folder is the automatically preset folder for saving backups.
FlexLoader Vision\Bin
In this folder, all the executable files required to operate FlexLoader Vision are
stored, such as FlexLoader Vision.exe and a number of dynamic libraries (*.dll)
and configuration files (*.xml). There is also the FlexLoader Vision log file
(FlexLoaderVision_date.log), which contains valuable information to ABB if there
are any problems.
When updating, some of the files in this folder may need to be replaced.
FlexLoader Vision\Configuration
In this folder, many of the different configuration files required for FlexLoader Vision
are stored, such as the camera calibration files (*.cal), the language file
(Language.xml), the Master/Slave control file (MasterSlave.xml), the FlexLoader
Vision configuration file (FlexLoaderVision.cfg), the camera configuration files
(*.dcf), and some system images (*.tif). The latest applicable configuration file
(FlexLoaderVision.cfg.LastGoodKnown) is also stored here. It can be used if a
change has been made in FlexLoader Vision or if a system crash has made
FlexLoaderVision.cfg unusable.
When updating, some of these files may need to be replaced.
For special applications, parts of the language file can be replaced by user-supplied
definitions. These modifications can be placed in the file Language.Override.xml.
If the system has user-defined mechanical equipment, the files
UserDefinedPlcCamera_1.xml - UserDefinedPlcCamera_4.xml and
UserDefinedPlcImageCamera_1.bmp - UserDefinedPlcImageCamera_4.bmp are
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
Note
Avoid storing the backup file on the same hard disk as the software is installed
on.
© Copyright 2014-2018 ABB. All rights reserved.
A Technical information
A.1 File structure in FlexLoader Vision
Continues on next page
251
Advertisement
Table of Contents
