ABB FlexLoader Vision Product Manual page 155

Start the program MilConfg. Select Boards > GigE Vision. Deselect Use Camera
Discovery Service and click Apply.
xx1800000967
General information about camera settings
The camera settings should first be made via the settings options in Pylon Viewer,
but can also be programmed in Matrox's own software IntelliCam.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
3 Click Save and wait for the camera to be detected again.
xx1800000968
© Copyright 2014-2018 ABB. All rights reserved.
11 Commissioning
11.3.2 Settings
Continued
Continues on next page
155