Table of Contents
Advertisement
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
2 Select Modules. Then select the module Common.
xx1800000268
3 Tap File and select Save module as....
4 Browse to the folder HOME:/System. Normally, there already is a file called
Common.sys in this folder. Tap OK to confirm this is where you want save
the calibration file.
xx1800000270
© Copyright 2014-2018 ABB. All rights reserved.
13 Robot integration
13.2 Calibrating the robot
Continued
Continues on next page
187
Advertisement
Table of Contents
