Manually Restoring A Backup - ABB FlexLoader Vision Product Manual

A Technical information
A.4 Manually restoring a backup
A.4 Manually restoring a backup
In certain cases, automatic restoring of a backup from the Service tab may fail, for
example if the files are damaged or if the backup was created using a previous
version. In these cases a backup can be restored manually.
How to do a manual backup:
256
Note
Errors that occur during manual management can make the system unusable
and require remedial action from ABB's side.
1 Find the folder that contains the backup files. Then search for FlexLoader
Vision's program folder. The folders Database, Data, and Configuration are
found in both the backup folder and FlexLoader Vision's program folder.
2 Make a safety copy of the whole of FlexLoader Vision's program folder.
3 Copy the whole Database folder from the backup folder to FlexLoader Vision's
program folder. Overwrite the existing files.
4 Delete the whole Data folder from FlexLoader Vision's program folder.
5 Copy the whole Data folder from the backup folder to FlexLoader Vision's
program folder.
6 Copy the following files from the Configuration folder to the Configuration
folder in FlexLoader Vision's program folder:
• All calibration files (*.cal)
• All configuration files (*.xml)
• FlexLoaderVision.cfg
• All camera configuration files (*.dcf)
• All image files (*.tif and *.bmp)
7 Copy all configuration files (*.xml) from the Bin folder to the Bin folder in
FlexLoader Vision's program folder.
© Copyright 2014-2018 ABB. All rights reserved.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B