Starting The System - ABB FlexLoader Vision Product Manual

6 Operation

6.2 Starting the system

6.2 Starting the system
To start the system, select a group and a detail in the drop-down lists in the
Operation window in FlexLoader Vision and click Start. The specified program is
now downloaded to the robot, which then starts automatically if it is set to auto
mode.
If the robot is not in auto mode, the following dialog box will appear when you click
Start.
xx1800000274
If you want to continue with the robot in auto mode, put the robot in auto mode
and click OK.
If you want to continue with the robot running at reduced speed, click Manual. Note
that FlexLoader Vision does not load the program that is specified for the detail if
you select Manual, instead the correct program must be loaded and started
manually.
We recommend to start the system at least once with the robot in auto mode in
order to load all modules correctly.
Note that the program must be started from the beginning.
90
© Copyright 2014-2018 ABB. All rights reserved.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B