Flexloader Vision Lite Master Detail - ABB FlexLoader Vision Product Manual

14.4.2 FlexLoader Vision Lite master detail

In addition to the basic configuration of FlexLoader Vision, the following settings
must be made:
The detail FlexLoaderVisionLite must be taught in the Masters group. Each time
a detail is saved in FlexLoader Vision Lite, the base values are copied from this
master detail and adapted for that specific teachin detail.
This applies, for example, to settings for exposure times, image preparations,
advanced position settings, accuracy requirements, settings for collision monitoring
etc. It does, however, not apply to settings for the appearance of the detail and
grip data.
An update of all details must be made after a change to the master detail. This
update is made on the Detail tab on the FlexLoader Vision Lite menu. Press the
Ctrl key, so that the Update all from Master button becomes visible. Click on it to
update all details.
The automatic update of details upon saving can be disabled by checking No
automatic update from master during teachin.
xx1800000287
Changes to the master detail require FlexLoader Vision to be configured for
FlexLoader Vision Lite with full access.
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
© Copyright 2014-2018 ABB. All rights reserved.
14 FlexLoader Vision Lite
14.4.2 FlexLoader Vision Lite master detail
241