Main Settings - ABB FlexLoader Vision Product Manual

11 Commissioning

11.1.2 Main settings

11.1.2 Main settings
The main window is shown at startup. The default configuration file is loaded
automatically.
The configuration file (FlexLoaderVision.cfg) is stored in the FlexLoader Vision
configuration folder, typically located at D:\Program Files\ABB Industrial
IT\Robotics IT\FlexLoader Vision\Configuration\.
Be sure to load and save the correct configuration file when specifying files
manually.
xx1800000433
System settings
General
FlexLoader Vision Lite
FlexLoader Vision Lite Full
Access
Allow send of many details
Continues on next page
138
Description
Enables the use of FlexLoader Vision Lite
features. General teachin is not accessible.
Enables the use of FlexLoader Vision Lite
features. General teachin features are access-
ible as well.
Normally only one coordinate is sent to the
robot. This flag enables sending of several
coordinates to the robot (see
parameter settings on page
Coordinates must be received and handled
differently (see
© Copyright 2014-2018 ABB. All rights reserved.
Advanced
68)
RAPID program on page 190).
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
Default
No
No
No