5.5 Advanced supervision settings
Advanced image supervision settings
Click Advanced under Image supervision on the Supervision tab to access
additional image supervision settings.
xx1800000241
Detection parameters
Fill inner holes
The default setting for collision detection is to fill the inner holes of details. However,
in some cases this can give an inaccurate image of the detail.
xx1800001054
Pos.
A
B
C
Product manual - FlexLoader Vision
3HAC051771-001 Revision: B
Description
Teachin detail
Inner holes filled
Inner holes not filled
© Copyright 2014-2018 ABB. All rights reserved.
5 Advanced teachin settings
5.5 Advanced supervision settings
Continues on next page
87