Commissioning Of The Profibus Slave-To-Slave Communication - Siemens SINAMICS S120 Function Manual

11.2.4.3

Commissioning of the PROFIBUS slave-to-slave communication

The commissioning of slave-to-slave communication between two SINAMICS drive devices
using the additional Drive ES package is described below in an example.
Settings in HW Config
Based on the example of the project below, the settings in HW Config are described when
using standard telegrams.
Figure 11-19 Example project of a PROFIBUS network in HW Config
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
11.2 Communication via PROFIBUS DP
Communication
695