Subaru Legacy 2004 Service Manual page 2517

Diagnostic Procedure with Diagnostic Trouble Code (DTC)
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
H: DTC P0725 ENGINE SPEED INPUT CIRCUIT
DTC DETECTING CONDITION:
Information of engine speed is not correctly received from ECM.
TROUBLE SYMPTOM:
No lock-up (after engine warm-up).
Step
1 CHECK DTC OF ECM.
2 CHECK DTC OF TCM.
3 CHECK DTC OF TCM.
I: DTC P0731 GEAR 1 INCORRECT RATIO
NOTE:
Refer to DTC P0736 for diagnostic procedure. <Ref. to 5AT(diag)-59, DTC P0736 REVERSE INCORRECT
RATIO, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
J: DTC P0732 GEAR 2 INCORRECT RATIO
NOTE:
Refer to DTC P0736 for diagnostic procedure. <Ref. to 5AT(diag)-59, DTC P0736 REVERSE INCORRECT
RATIO, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
K: DTC P0733 GEAR 3 INCORRECT RATIO
NOTE:
Refer to DTC P0736 for diagnostic procedure. <Ref. to 5AT(diag)-59, DTC P0736 REVERSE INCORRECT
RATIO, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
L: DTC P0734 GEAR 4 INCORRECT RATIO
NOTE:
Refer to DTC P0736 for diagnostic procedure. <Ref. to 5AT(diag)-59, DTC P0736 REVERSE INCORRECT
RATIO, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
M: DTC P0735 GEAR 5 INCORRECT RATIO
NOTE:
Refer to DTC P0736 for diagnostic procedure. <Ref. to 5AT(diag)-59, DTC P0736 REVERSE INCORRECT
RATIO, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
Check
Is DTC of AT CAN communica-
tion circuit detected?
Is DTC of AT CAN communica-
tion circuit detected?
Is any of following DTC
detected?
' Output Speed Sensor Circuit
' AT Vehicle Speed Sensor
Circuit Malfunction (Rear
Wheel)
5AT(diag)-58
Yes
Perform the diag- Go to step 2.
nosis according to
DTC.
Perform the diag- Go to step 3.
nosis according to
DTC.
Perform the diag- Replace the TCM.
nosis according to <Ref. to 5AT-61,
DTC. Transmission Con-
trol Module
(TCM).>
No