Mazda CX-9 Grand Touring 2009 Manual page 83

2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
connector
Inspect the wiring harness between SAS
control module terminal and seat track
position sensor terminals for short to ground,
short to power supply, and open circuit:
2AB-A
2AF-C
Is the wiring harness normal?
INSPECT SAS CONTROL MODULE
Connect the SAS control module connector.
Connect the clock spring connector.
Connect the passenger-side air bag module
connector.
Connect the driver-and passenger-side front
seat connectors.
3
Connect the driver-and passenger-side
curtain air bag module connectors.
Connect the driver-and passenger-side pre
tensioner seat belt connectors.
Connect the seat track position sensor
connector.
Are DTCs C1946, C1947, C1948, C1981
and/or C1982 indicated?
2008 Mazda CX-9 Grand Touring
Yes
NO
[Present malfunction diagnosis]
Replace the SAS control module.
(See SAS CONTROL MODULE
REMOVAL/INSTALLATION .)
[Past malfunction diagnosis]
DTC troubleshooting completed.
DTC troubleshooting completed.