Mazda CX-9 Grand Touring 2009 Manual page 234

2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
11. Install the C1 clutch component on the input shaft and set a dial indicator as shown in the figure.
12. Apply compressed air as shown in the figure and measure the C1 clutch piston stroke.
Air pressure 200 kPa {2.0 kgf/cm
C1 clutch piston stroke 1.2-1.4 mm {0.047- 0.055 in}
If not within the specification, select an appropriate retaining plate.
Fig. 138: Applying Compressed Air And Measuring C1 Clutch Piston Stroke.
Courtesy of MAZDA MOTORS CORP.
RETAINING PLATE SIZE
Identification mark
2008 Mazda CX-9 Grand Touring
Fig. 137: Installing Snap Ring In Groove
Courtesy of MAZDA MOTORS CORP.
2
, 29 psi}
1
2
3
4
A
5
Thickness (mm {in})
2.8 {0.110}
2.9 {0.114}
3.0 {0.118}
3.1 {0.122}
3.15 {0.124}
3.2 {0.126}