Mazda CX-9 Grand Touring 2009 Manual page 353

2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Fig. 23: Identifying Oil Cooler & Oil Pipe
Courtesy of MAZDA MOTORS CORP.
8. Connect the input/turbine speed sensor terminal 2 to the battery positive terminal, connect the battery
negative terminal to input/turbine speed sensor terminal 1 through an ammeter set to a resistance of 100
ohm.
Fig. 24: Connecting Input/Turbine Speed Sensor Terminal 2 To Battery Positive Terminal
Courtesy of MAZDA MOTORS CORP.
9. Measure the current while waving a magnet back and forth over the top of the input/turbine speed sensor
(less than 5 mm {0.197 in}).
If there is any malfunction, replace the input/turbine speed sensor. (See INPUT/TURBINE
SPEED SENSOR REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)
Input/turbine speed sensor
SIGNAL REFERENCE
Signal Current (mA)
High 12.0-16.0
Low 4.0-8.0
10. Install the input/turbine speed sensor. (See INPUT/TURBINE SPEED SENSOR
REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)
2008 Mazda CX-9 Grand Touring