Mazda CX-9 Grand Touring 2009 Manual page 268

2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Fig. 194: Identifying Snap Ring Of Transaxle Case
Courtesy of MAZDA MOTORS CORP.
2. Remove the low and reverse brake return spring from the transaxle case.
CAUTION:
Fig. 195: Identifying Low And Reverse Brake Return Spring
Courtesy of MAZDA MOTORS CORP.
3. While pushing the low and reverse brake piston by hand, apply compressed air into the oil passage of the
transaxle case as shown in the figure and remove the low and reverse brake piston.
Air pressure
392 kPa {4.0 kgf/cm
2008 Mazda CX-9 Grand Touring
Do not damage the seal on the piston.
2
, 57 psi}