Mazda CX-9 Grand Touring 2009 Manual page 586

Fig. 21: Identifying Water Pump And Plastic Sheeting
Courtesy of MAZDA MOTORS CORP.
WATER PUMP INSTALLATION NOTE
1. Tighten the water pump bolts in the order shown in the figure.
Tightening torque
8.5-11.5 N.m {87-117 kgf.cm, 76-101 in.lbf}
Fig. 22: Identifying Water Pump Bolts Tighten Sequence
Courtesy of MAZDA MOTORS CORP.
COOLING FAN COMPONENT REMOVAL/INSTALLATION [MZI-3.7]
WARNING:
2008 Mazda CX-9 Grand Touring
2008 ENGINE Cooling System (MZI-3.7) - Mazda CX-9
Never remove the cooling system cap or loosen the radiator drain
plug while the engine is running, or when the engine and radiator are
hot. Scalding engine coolant and steam may shoot out and cause
serious injury. It may also damage the engine and cooling system.
Turn off the engine and wait until it is cool. Even then, be very
careful when removing the cap. Wrap a thick cloth around it and
slowly turn it counterclockwise to the first stop. Step back while the
pressure escapes.