Mazda CX-9 Grand Touring 2009 Manual page 307

2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
61. Install the oil reservoir lock plate and the tube clamp to the converter housing.
Tightening torque 3.9 - 6.9 N.m {40 - 70 kgf.cm, 26 - 60 in.lbf}
Fig. 266: Identifying Oil Reservoir Lock Plate And Tube Clamp Bolt
Courtesy of MAZDA MOTORS CORP.
62. Apply ATF to the new gaskets.
63. Install the gaskets to the transaxle case as shown in the figure.
Fig. 267: Locating Gaskets Of Transaxle Case
Courtesy of MAZDA MOTORS CORP.
64. Apply ATF to the new transaxle case gaskets.
65. Install the transaxle case gaskets to the transaxle case as shown in the figure.
CAUTION:
66. Remove any packing material and be careful not to get oil on the contact surface of the transaxle case and
the converter housing.
67. Clean the contact surface of the transaxle case and the converter housing and the bolt holes.
2008 Mazda CX-9 Grand Touring
Verify to install the transaxle case gasket as shown in the
figure.