Mazda CX-9 Grand Touring 2009 Manual page 110

3. Then, select items from the screen menu in the following order.
1. Select "Programmable Module Installation".
2. Select "RCM".
4. Perform the configuration according to the directions on the screen.
5. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
If a DTC (s) is detected, perform the applicable DTC inspection. (See DTC TABLE .)
Fig. 20: Identifying DLC-2 Location
Courtesy of MAZDA MOTORS CORP.
SEAT WEIGHT SENSOR CONTROL MODULE REMOVAL/INSTALLATION
CAUTION:
1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for 1 min or more .
3. Remove the front passenger seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
4. Remove in the order indicated in the table.
Fig. 21: Identifying Seat Weight Sensor Control Module, Connector And Fastener
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
When the seat weight sensor control module is replaced with a new
one, perform the seat weight sensor calibration using the M-MDS.
(See SEAT WEIGHT SENSOR CALIBRATION.)