Mazda CX-9 Grand Touring 2009 Manual page 57

module terminal 1Q and clock spring terminal
1B, SAS control module terminal 1U and clock
spring terminal 1A for the following:
Short to ground
Short to power supply
Open circuit
Is the wiring harness normal?
DTC B1059, B2229, B2231, B2233, B2235
DTC B1059, B2229, B2231, B2233, B2235 DETECTION CONDITION AND POSSIBLE CAUSE
B1059 Passenger-side air bag module (inflator No.2) and other air bag module circuits short
B2229 Passenger-side air bag module (inflator No.2) circuit short to body ground
DTC B2231 Passenger-side air bag module (inflator No.2) circuit short to power supply
B2233 Passenger-side air bag module (inflator No.2) circuit resistance high
B2235 Passenger-side air bag module (inflator No.2) circuit resistance low
WARNING:
DETECTION
CONDITION
POSSIBLE
CAUSE
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions
may cause injury due to an operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
Resistance other than 1.0-9.7 ohms detected in passenger-side side air bag module
circuit
Malfunction in wiring harness between passenger-side air bag module (inflator No.2)
and SAS control module
Open or short circuit in wiring harness between passenger-side air bag module
Passenger-side air bag module malfunction
No Replace the air bag wiring harness.
(inflator No.2) and SAS control module
SAS control module malfunction