Mazda CX-9 Grand Touring 2009 Manual page 39

2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
WARNING:
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner seat belts,
which may seriously injure you. Read the
service warnings and cautions before
handling the air bag system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
(See AIR BAG SYSTEM SERVICE
1
CAUTIONS .)
Turn the ignition switch to the LOCK position.
Disconnect the negative battery cable and wait
for 1 min or more.
Disconnect the crash zone sensor connector.
(See CRASH ZONE SENSOR
REMOVAL/INSTALLATION .)
Is there any malfunction of the crash zone
sensor connector?
INSPECT WIRING HARNESS BETWEEN
CRASH ZONE SENSOR AND SAS CONTROL
MODULE
Turn the ignition switch to the LOCK position.
Disconnect the negative battery cable and wait
for 1 min or more.
Remove the column cover. (See COLUMN
COVER REMOVAL/INSTALLATION .)
Disconnect the clock spring connector. (See
COMBINATION SWITCH
REMOVAL/INSTALLATION .)
Remove the glove compartment. (See GLOVE
COMPARTMENT
REMOVAL/INSTALLATION .)
Disconnect the passenger-side air bag module
connector. (See PASSENGER-SIDE AIR
BAG MODULE
REMOVAL/INSTALLATION .)
Disconnect the driver and passenger-side front
seat connectors. (See FRONT SEAT
REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
Yes Replace the air bag wiring harness.
No Go to the next step.
Replace the crash zone sensor, then go
to the next step.
Yes
(See CRASH ZONE SENSOR
REMOVAL/INSTALLATION .)