Mazda CX-9 Grand Touring 2009 Manual page 460

Fig. 3: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
PID/DATA MONITOR AND RECORD PROCEDURE
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "DataLogger".
2. Select "Modules".
3. Select "ABS".
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "ABS".
3. Select "DataLogger".
3. Select the applicable PID from the PID table.
4. Verify the PID data according to the directions on the screen.
Fig. 4: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
NOTE:
2008 Mazda CX-9 Grand Touring
2008 BRAKES On-Board Diagnostic (DSC/RSC) - Mazda CX-9
The PID data screen function is used for monitoring the calculated