2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
10. Using a plastic hammer, tap the control valve body cover to remove it.
CAUTION:
NOTE:
1. Insert a precision screwdriver from the backside into the connector as shown in the figure.
2008 Mazda CX-9 Grand Touring
Fig. 12: Identifying Control Valve Body Cover Bolts
Courtesy of MAZDA MOTORS CORP.
Be careful not to damage the solenoid valves and connectors.
Do not pull the wiring harnesses when removing the connector.
Disconnect the solenoid connector according to the following
procedure:
Fig. 13: Tapping Control Valve Body Cover
Courtesy of MAZDA MOTORS CORP.