Mazda CX-9 Grand Touring 2009 Manual page 22

B1994 Driver-side side air bag module circuit resistance high
B1995 Driver-side side air bag module circuit resistance low
WARNING:
DETECTION
CONDITION
POSSIBLE
CAUSE
DIAGNOSTIC PROCEDURE
DTC B1047, B1992, B1993, B1994, B1995 DIAGNOSTIC PROCEDURE
STEP
INSPECT DRIVER-SIDE SIDE AIR BAG
MODULE
1
Using the M-MDS, verify the following
PID/DATA monitor.
(See PID/DATA MONITOR TABLE.)
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions
may cause injury due to an operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
Resistance other than 1.0-9.7 ohms detected in driver-side side air bag module circuit
Malfunction in wiring harness between driver-side side air bag module and SAS
control module
Open or short circuit in wiring harness between driver-side side air bag module and
Driver-side side air bag module malfunction
INSPECTION
SAS control module
SAS control module malfunction
Replace the SAS control module. (See
Yes SAS CONTROL MODULE
REMOVAL/INSTALLATION .)
ACTION