Mazda CX-9 Grand Touring 2009 Manual page 258

2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Fig. 180: Identifying O-Rings Of Intermediate Shaft
Courtesy of MAZDA MOTORS CORP.
C2 CLUTCH INSPECTION
1. Inspect the lining of all drive plates.
If the lining is flaking or has changed color, or if it is worn or the print mark is wearing away,
replace with a new drive plate. When replacing, inspect the contact surfaces between the retaining
plate, driven plate and drive plate. If they are scratched or have changed color, replace with new
parts.
NOTE:
Fig. 181: Inspecting Lining Of All Drive Plates
Courtesy of MAZDA MOTORS CORP.
2. Using vernier calipers, measure the free length of the piston return spring.
C2 clutch return spring free length
Standard: 14.02 mm {0.5520 in}
If it is less than the specification, replace the piston return spring with a new one.
2008 Mazda CX-9 Grand Touring
Before replacing with new drive plates, soak them at least 2 h in ATF.