2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Fig. 14: Inserting Precision Screwdriver From Backside Into Connector
Courtesy of MAZDA MOTORS CORP.
2. Pry the screwdriver in the direction of the arrow and disconnect the connector.
CAUTION:
11. Disconnect the solenoid connectors, VSS connector and the input/turbine speed sensor connector.
12. Disconnect the coupler component from the clamp.
2008 Mazda CX-9 Grand Touring
Do not damage the solenoid valves and connectors with
the screwdriver.
When disconnecting connectors, grasp the connectors,
not the wiring harnesses. Otherwise, the wiring harnesses
may be pulled out of the connector causing poor contact.
Fig. 15: Prying Screwdriver In Direction Of Arrow
Courtesy of MAZDA MOTORS CORP.