Mazda CX-9 Grand Touring 2009 Manual page 82

2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
(See AIR BAG SYSTEM SERVICE
CAUTIONS .)
Turn the ignition switch to the LOCK
position.
Disconnect the negative battery cable and
wait for 1 min or more.
Remove the column cover. (See COLUMN
COVER REMOVAL/INSTALLATION .)
Disconnect the clock spring connector. (See
COMBINATION SWITCH
REMOVAL/INSTALLATION .)
Remove the glove compartment. (See
GLOVE COMPARTMENT
REMOVAL/INSTALLATION .)
Disconnect the passenger-side air bag
2
module connector. (See PASSENGER-
SIDE AIR BAG MODULE
REMOVAL/INSTALLATION .)
Disconnect the driver and passenger-side
front seat connectors. (See FRONT SEAT
REMOVAL/INSTALLATION .)
Disconnect the driver and passenger-side
curtain air bag module connectors. (See
CURTAIN AIR BAG MODULE
REMOVAL/INSTALLATION .)
Remove the B-pillar lower trim. (See B-
PILLAR LOWER TRIM
REMOVAL/INSTALLATION .)
Disconnect the driver and passenger-side
pre-tensioner seat belt connectors. (See
FRONT SEAT BELT
REMOVAL/INSTALLATION .)
Disconnect the SAS control module
connectors. (See SAS CONTROL
MODULE
REMOVAL/INSTALLATION .)
Disconnect the seat track position sensor
2008 Mazda CX-9 Grand Touring
Yes
No
Replace the seat track position sensor,
then go to next step.
Replace wiring harness, then go to next
step.