Mazda CX-9 Grand Touring 2009 Manual page 374

2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Fig. 50: Identifying Manual Shaft Lever
Courtesy of MAZDA MOTORS CORP.
16. Install the clip to the selector cable as shown in the figure.
17. Shift the selector lever to P position.
18. Turn the manual shaft lever to P position.
Fig. 51: Identifying Clip To Selector Cable
Courtesy of MAZDA MOTORS CORP.
19. Connect the selector cable and install the clip.
20. Connect the TCM connector.
21. Install the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-
3.7] .)
22. Connect the negative battery cable.
WARNING:
23. Perform the neutral position learning. (See NEUTRAL POSITION LEARNING.)
2008 Mazda CX-9 Grand Touring
If you replace the ATX or TCM, be sure to initialize the learned
values and perform neutral position learning.