Mazda CX-9 Grand Touring 2009 Manual page 428

2008 TRANSMISSION Automatic Transaxle Shift Mechanism - Mazda CX-9
22. Inspect shift lock operation. (See SHIFT-LOCK INSPECTION.)
SELECTOR LEVER INSPECTION
1. Turn the ignition switch to the ON position, (engine OFF)
2. With the brake pedal depressed, verify that there is a "click" at each range when shifted.
3. Verify that the selector lever can be shifted.
4. Verify that there is a "click" at each position when shifted from P position to M range.
Fig. 16: Inspecting Click At Each Position When Shifted From P Position To M Range
Courtesy of MAZDA MOTORS CORP.
5. Verify that the positions of the selector lever and the indicator are aligned.
If there is any malfunction, adjust the TR switch. (See TCM REMOVAL/INSTALLATION
[AW6A-EL, AW6AX-EL] .)
6. Verify that the vehicle operates in each selected range.
Fig. 17: Inspecting Positions Of Selector Lever And Indicator Are Aligned
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
adjusted, it cannot be adjusted again. Therefore, replace the
switch with a new one when replacing the power brake unit or
the pedal, or performing any procedure that changes the pedal
stroke.