Mazda CX-9 Grand Touring 2009 Manual page 533

Fig. 22: Inspection & Repair Procedure Diagram
Courtesy of MAZDA MOTORS CORP.
Lateral runout inspection
1. To secure the disc plate and the hub, tighten the hub nuts upside down or insert a washer (thickness 10
mm {0.39 in} with an inner diameter more than 12 mm {0.47 in}) between the hub bolt and the hub nut.
NOTE:
2. After tightening all the hub nuts to the same torque, put the dial gauge on the friction surface of disc plate
10 mm {0.39 in} from the disc plate edge.
3. Rotate the disc plate one time and measure the runout.
Front disc plate runout limit 0.05 mm {0.002 in}
Thickness variation inspection
1. Clean the disc plate-to-pad friction surface using a brake cleaner.
2008 Mazda CX-9 Grand Touring
2008 BRAKES Conventional Brake System - Mazda CX-9
The component parts of the SST (49 B017 001 or 49 G019 003) can be
used as a suitable washer.